Factors That Can Influence the Performance of Your Automatic Watch

Factors That Can Influence the Performance of Your Automatic Watch

A mechanical watch is a precision piece that has about 100 different components in a standard capacity. Wheels, pine nuts, and bridges, of them, are prepared and accumulated with extreme health. Any tenth difference can stop your watch or back. There is no right amount of oil, or it has dirt, the reasons that can affect your watch. But which other factors can affect your automatic watch work and can you avoid them?

Operation of your automatic watch

First, we will see the mechanical watch operation very fast.

An automatic, or mechanical clock needles, mainly move through a rope that spreads in the kite. This rope is stressful, and the only thing that does not open is a small erotic that slows it down and slowly releases it.

When the clock stops, the reason is that the rope has been removed, it has to be closed again so that our watch can work again. This process, in the most common movements, usually takes about 42 42 hours.

There are two ways through which the rope is -deposited. Rotate a crown, until the rope is completely rotated again. And second, in the form of automatic watches, thanks to a dual pendant.

 

There are some bearings inside this pendant, and due to the movement of the hand, the rope is constantly lifting. At this time the clock is released to some extent without any movement, and the rope is also opened and stopped.

The reasons why the mechanical clock can stop

In a mechanical clock, you will have to walk in the clock so that it does not stop. In the case of automatic, even if you don’t use it, you can save the clock in the motor box, so that it makes wrist movements imitates, and when you want to use it ever Don’t stand up.

If you also take care of your watch, you can make reviews from time to time by every manufacturer, you can watch for decades. Keep in mind that the oils that use these types of watches are special, even in the same capacity, there are different types. Therefore, the mechanical clock needs to review the reliability and precision of its ingredients.

Of course, I do not have to say, the blow to the clock can also affect the error. But it’s logical and you certainly know that. Watches and movements have their star anti-system, but everything has a limit.

But what I have told you so far is sure that you already know or even imagine it. Many people do not know that there are other reasons, or other situations, which they can affect your automatic watch function. And with everything I have explained so far, you will see that you will think well, it’s logical. We will see other factors that can affect the automatic watch process.

Magnetism

This is one of the reasons that give you the most voice, or have you ever heard? And you know what our grandmother said, when the voice of the river comes, it raises water.

And in this case, this is true, having a strong magnetic device near the clock can affect its process. In addition, in the case of mechanical watches, if you have made the movement magnetic, you have to take it to a watchmaker to solve the problem. Even in this type of clock, even if you remove the magnetic field from the clock, if it has already become magnetic, it will not be resolved just because it can be in quartz movements.

Remember that in your daily life you will find many devices from magnetic fields. Mobile, television, magnet closing bags, and even many bracelets are through the magnet. I also tell you, no magnetic field will magnetize your watch. Many Calibers are safe from this situation, and you will need a great field to affect your watch’s health.

Position

Certainly, you have noticed that the movements or watches maker almost always make Caliber’s health clear. It has been identified, for example, with +/- 20 seconds of the day with variations. But or more or more?

Well, the reason for this is that gravity does its job, and depending on the position in which your watch is kept, it will be delayed or moving forward. It is believed that when you wear it on the wrist, the watch is in all positions, so some positions are compensated for others.

But if you leave the clock in the same position all day, for example, if you are placed on your desk, you will see that the variable goes in only one direction. You can test your watch in another way, and you will test these differences. A box of automatic watches with a small engine will prevent it from being with you, as it moves your watch to all positions.

Temperature

And finally, another factor that can affect the process of your watch can be higher and low temperatures. The components of a watch are metal. And as stated above, they are thousands of mistaken pieces, as a wrong move in a component can affect its last operation. Sudden temperature changes can expand or deal with these ingredients.

As a standard, when the temperature is approaching 0ºC, the clock moves forward. However, when the temperature is more than 35 or 40 degrees, the clock may begin to delay.